How to Fix HP Officejet Pro 8610 Printhead Error 0xc19a0040?

Generally HP officejet pro 8610 error code 0xc19a0040 is seen when print head seems to be missing or not detected while performing printing operation or it can be incorrectly installed. If you are not using Original cartilages in your printer the print head may not be detected after a period of time. It can cause an error message using pirated copy of cartilages leads to HP printer printhead error 0xc19a0040.

If you are not able to setup the HP printer you can read our post related to setting up the printer read now: how to set up HP wireless printer on windows 10. But now to fix HP officejet pro 8610 error 0xc19a0040 perform step by step instructions explained in the blog below to fix errors.

HP Officejet Pro 8610 Printhead Error 0xc19a0040

Steps to Fix HP Officejet Pro 8610 Printhead Error 0xc19a0040:


Step1: Switch on the printer and wait till it gets silent.

Step2: Remove all the attached cable while the printer is on.

Step3: Disconnect power cable and wait for 1 minute. 

Step4: Now, reconnect all the cable and wait for printer to switch on and check 8610 error 0xc19a0040 is fixed.


Step1: Open doors give access to print head wait for it to become idle.

Step2: Detach all cables and lift cartilage handle.

Step3: Hold print head from both sides and pull it slightly without affecting cartilages.

Step4: Now, insert print head after cleaning it.

Step5: Reconnect all the cables and switch it on.


Step1: Open cartilage head and check whether it is connected to chip or not.

Step2: Detach cartilage and clean it using damp napkin dip in distilled water.

Step3: Check copper colored place free from dirt.

Step4: Repeat steps 1 to 3 steps for remaining cartilages.

Step5: If error is not resolved change ink cartilages.


Step1: Now, press e-print button located on the printer and wait for status.

Step2: Select settings button located on the bottom of the screen.

Step3: Now press printer update button and wait to get it update.


Step1: Open control panel while login in admin mode.

Step2: Click on windows update and select check for updates.

Step3: Install all the updates and restart the computer.

Call HP Support Number 1-888-687-4491 to Fix HP Printhead Error 0xc19a0040

If on following all the methods given above in the blog HP officejet pro is not responding on windows you can contact an expert. To get connected with printer professionals you can contact HP officejet pro 8600 printer support number and get help online to fix the HP printer problem. Team of certified tech professionals is working here to fix the HP printer errors with the right approach.

Leave a Comment